Search | Site Map | Login to Site!
HOME ABOUT TRAFO PRODUCTS & SERVICES FEEDBACK LINK EXCHANGE BLOG CONTACT US
Products Offered by Trafo
 
Power Distribution Transformers
 
Manufacturing of Transformers
Testing of Transformers
 
Home > Products by Trafo
Products offered by Trafo Electric
 
Power Distibution Transformers:

Trafo, a company dedicated to quality and service, offers power and distribution transformers. Trafo's manufacturing facilities at MIDC Pune, is one of the finest transformer manufacturing facilities in India and is equipped with all modern manufacturing and testing facilities required under is 2026.

Transformers with ratings from 25 KVA to 10000 KVA and up to 33 KV class fall in our standard manufacturing range. Other types are also manufactured on special orders. Our transformers conform to the latest is 2026 specification.
 
STANDARD TESTS:
The following tests will be carried out on all Transformers. The numbers shown do not necessarily indicate the sequence in which the tests will be carried out. All tests will be in accordance with the. Latest revision of IS 2026.

1. Measurement of resistances of all windings of each unit.
2. Ratio tests at all tap positions.
3. Polarity and Vector group tests at normal tap.
4. No load loss at rated voltage, rated frequency at normal tap.
5. Excitation current measurements at rated voltage, rated frequency at normal tap.
6. Impedance and load loss measurement at rated current, at normal tap of each unit.
7. Separate Source Voltage withstand test.
8. Induced over voltage withstand test.
9. Measurement of insulation resistance.
10. Dielectric capacity of the transformer oil.

The design and manufacture of our transformers are subject to constant improvement and review, and the particulars given in this catalogue may vary in details with the equipment supplied.

SPECIAL TESTS:
The following tests are also conducted at out factory if specifically asked for by our customer:

1. Unbalance current test.
2. Vacuum and pressure testing of transformer tank.
3. Heat run test.
4. Measurement of zero sequence impedance.
5. Measurement of noise level.
6. Magnetic balance test.

  Technical specifications of Distribution transformer
  Click here to know more  Go to Services Page
 
Facebook Twitter Linkedin Blog
Press | Downloads | Customer Support | Contact Us | Classifieds | Message Board |Privacy Statement | Register Yourself | Site Map
© 2003. Trafo Electric Pvt. Ltd. All Rights Reserved. Site Designed & Maintained by: General Data. For more info, e-mail: info@trafo.in